Here you will be taught how to make those trendy tentacles.

1. Make a cone.

2. Now click the modify tab and select BEND.

3. Use these settings. You can change the angle if u want more or less.

4. Now click back on cone and select TWIST from the modifier list. It should be 2 spots below where BEND was.

5. Use these settings. again you can change the angle if you want. Make sure that TWIST is above BEND in your list.

6. Now click back on cone again in the list. Then in the modify list select meshsmooth. And use these settings.

7. And thats it. Heres what mine looks like.