In this tutorial you're going to learn how to add a percentage preloader using
the "components" of FlashMX.
We're going to use a ready-made extension
for the preloader.
Download the following
files:
- The
Loader Extension .mpx file (credit: programed by Armen
Abrahamyan).
- To use the .mpx file, you'll need the Extension
Manager
1:
After completing the installation of the
Extension Manager, and successfully setting up the .mpx loader
file, you should be able to see the loader component from
the drop-down menu of the Components (Go to Windows>Components,
or press ctrl F7)
And that's our "percentage preloader" component.
Fig 1
2:
Good, now create two layers as shown in Fig
2.
- Select the second frame of the "Main Content" layer
and place your content there.
- Right-click on that keyframe and go to Actions,
and add stop(); (You don't want your movie to go in
loop back to your preloader).
Fig 2
Guess what! You can go and test your movie
now! you're done.
(Go to Control>Test Movie)
Note: Make sure you select "show
streaming" in order to see the preloader in action.
Conclusion:
What we did:
- Created two layers: "Prelaoder" and "main content"
- draged the loader component to frame 1 of the "preloader" layer.
- Placed the content on frame 2 of the "main content" layer
and applied a "stop" action to it.
In 2 steps, you've got a percentage preloader!
Download *.fla
